Direct-Pages.comDirect Pages is the internet project of Blogs Content Syndication

A knife-like boat design provides a covert, fuel-efficient ride

While experimenting with high-speed yacht designs for the America’s Cup sailing race, aerospace engineer A. Calderon began investigating ways to reduce the wake that builds around the vessel’s bow, sides and stern as it cruises through water and grows as the boat moves faster, increasing drag and draining fuel. The bow of Calderon’s concept, called the transonic hull, is shaped like a tight V and cuts through water like a knife, diverting the wake sideways and under the boat to nearly eliminate it altogether. Preliminary tests of a 20-foot wood-and-fiberglass prototype indicate that the model incurs 28 to 38 percent less drag than an ultra-streamlined America’s Cup yacht, which Calderon says could translate to 30 percent better fuel economy than similar boats. And it powered through waves four feet tall without bouncing.

Sleek Hull: The sharply angled hull comes together like a knife at the bow to part the water [A] and divert it beneath the boat’s flat, shallow-sitting stern [B]. Water from the bow pushes up on the rear, keeping the nose in the water and allowing the craft to slice through waves without kicking the front end up.
Stealth Mode:Shaped like a stealth bomber’s
fuselage, the XTH-170 military model’s four flat facets above the water hide it from radar, as does the boat’s small side and rear wake.
Sneaky MotorsBecause the hull is more than 30 percent more fuel-efficient than current boats, future versions can get by with smaller, cooler, quieter motors that make infrared and acoustic detection more difficult.
The design is still unproven. The early results look promising, says Luigi Martinelli, a fluid-dynamics researcher at Princeton University, but he worries that the hull’s efficiency might not translate well to slow speeds. “Calderon has focused on the right part of the boat to make real progress in reducing bow wake,” he says, but adds that he needs to see more test data and computer simulations to vouch for the concept.

Later this year, Calderon’s Transonic Hull Company plans to build a 100-foot prototype that incorporates strength and stability improvements gleaned from its first tests. If the technology scales up, the company will begin marketing the craft to offshore drilling companies as a boat that zips through storm chop in emergencies and start construction on a 100- to 300-foot stealth model that can take on 20-foot waves at 55 mph aimed at police and military applications.